7005S70FB Overview

In this case, the memory type of the device can be classified as RAM, SRAM. It is supplied votage within Bulk. There are 68 terminations on the chip. This part supports as many as 1 functions for the comprehensive working procedure. The memory device designed for this application has been designed to be powered by an 5V power supply. The memory device has an 68-pin package, which encloses it in a small package. A memory device like this has 68 pins, indicating that there are 68 memory locations on the device. According to the datasheet, this memory chip operates at an operating voltage of 5V. Despite all its merits, this chip also features INTERRUPT FLAG; AUTOMATIC POWER-DOWN; SEMAPHORE to boost system performance. A memory address is accessed through 2 ports on this chip. Talking about power supplies, this memory chip requires merely 5V. There are I/O ports on this memory ics that have COMMON-bit memory mapping. This device must not operate below -55°C . It should not be operated above 125°C°C. A maximum supply current of 0.3mA can be used to operate this device. Usually, this memory ics falls under the SRAMs component category.

7005S70FB Features

68 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; AUTOMATIC POWER-DOWN; SEMAPHORE
I/O Type: COMMON

7005S70FB Applications

There are a lot of Integrated Device Technology (IDT) 7005S70FB Memory applications.

• servers
• hard disk drive (HDD)
• eDRAM
• nonvolatile BIOS memory
• networking
• eSRAM
• networks
• supercomputers
• workstations,
• Camcorders