As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In the case of PLCC, it is embedded within the case. A memory chip with a capacity of 16kB is used on this device. On the chip, there are 68 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 5V. The memory device has an 68-pin package, which encloses it in a small package. I have noticed that the memory device has 68 pins, which indicates that it has 68 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. The memory chip has 2 ports for granting read/write access to one memory address. Temperatures below -40°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 85°C, otherwise damage to the part may occur as a result of overheating. It is recommended that this part be supplied with at least 4.5V volts. The operating voltage shall not exceed 5.5V.