7006L35G Overview

There is a memory type RAM, SDR, SRAM for this type of device. This chip has an 16kB size of memory on it, so a lot of data can be stored on it. The chip contains 68 terminations. As many as 1 functions are supported for comprehensive working. An 5V supply is required for this ic memory chip to operate properly. A package of 68 pins is used to protect this memory device. The memory device has 68 pins, which means that it has 68 memory locations, which indicates it is an 68-bit device. This memory runs on an 5V operating supply voltage. Memory chips configured with Through Hole mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 210mA. Although it has all the merits this chip has, it is also equipped with INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN to give a performance boost to the system. Each memory address is accessed by one of 2 ports on this chip. The power supply needed for this memory chip is only 5V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 4.5V. A maximum voltage of 5.5V shall be allowed for its operating voltage.

7006L35G Features

68 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN
I/O Type: COMMON

7006L35G Applications

There are a lot of Integrated Device Technology (IDT)
7006L35G Memory applications.

• personal computers
• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic