Welcome to Hotenda.com Online Store!

logo
userjoin
Home

7006L55PF8

7006L55PF8

7006L55PF8

Integrated Device Technology (IDT)

5V V Surface Mount 64 Pin Memory IC 128 kb kb 14mm mm 210mA mA 8b b

SOT-23

7006L55PF8 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 7 Weeks
Mount Surface Mount
Package / Case TQFP
Number of Pins 64
Packaging Tape & Reel
Published 2008
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 64
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.8mm
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 64
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Interface Parallel
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Memory Size 16kB
Number of Ports 2
Nominal Supply Current 210mA
Memory Type RAM, SDR, SRAM
Access Time 55 ns
Organization 16KX8
Output Characteristics 3-STATE
Address Bus Width 14b
Density 128 kb
Standby Current-Max 0.0015A
I/O Type COMMON
Sync/Async Asynchronous
Word Size 8b
Standby Voltage-Min 2V
Length 14mm
Height Seated (Max) 1.6mm
Width 14mm
Thickness 1.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead
7006L55PF8 Product Details

7006L55PF8 Overview


In this case, the memory type of the device can be classified as RAM, SDR, SRAM. Case Tape & Reel is available. An embedded TQFP case surrounds memory ics. It is estimated that the memory size on the chip is 16kB. It is planted on the chip with 64 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 5V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 64 pins that allows it to be connected to a computer. The memory device has a total of 64 pins, thus indicating that it has a total of 64 memory locations. It is noted that the operating supply voltage of this memory is 5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 210mA for its nominal supply current when it comes to the memory component. This chip is not only loaded with advantages, but it also comes with INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN, which boosts the performance of your system. Several ports on this chip are used to access one memory address for reading and writing. In terms of power requirements, this memory chip uses only 5V . I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than 0°C. The temperature should not exceed 70°C degrees Celsius. SRAMs components are usually considered types of this component. This memory ics should not be operated with a voltage below 4.5V volts at the minimum. There shall be a voltage limit of 5.5V for its operation.

7006L55PF8 Features


Package / Case: TQFP
64 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN
I/O Type: COMMON


7006L55PF8 Applications


There are a lot of Integrated Device Technology (IDT)
7006L55PF8 Memory applications.


  • networking
  • personal computers
  • servers
  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News