7008S55J Overview

RAM, SDR, SRAM is its memory type. As you can see, it is embedded in PLCC case. There is an 64kB memory capacity on the chip. As you can see from the diagram, the chip is planted with 84 terminations. In total, 1 functions are supported by this part. The memory device designed for this application has been designed to be powered by an 5V power supply. It is encased in an 84-pin package that contains this ic memory chip. It has 84 pins indicating it has 84 memory locations. It is noted that the operating supply voltage of this memory is 5V. Chips such as this one are mounted using Surface Mount mounting, a straightforward method of mounting that is effective. Memory chip's nominal supply current is 270mA. An address can be read and/or written to one memory address using 2 ports on the chip. This memory chip requires a mere 5V of power. In addition to this device, there are COMMON-bit memory mapped I/O port addresses on this device. A minimum operating temperature of 0°C must be met by this device. As a general rule, memory ics is recommended that the product be operated at temperatures no higher than 70°Cc, otherwise, damage could be done to it. This memory ics requires a minimum voltage of 4.5V. In order for it to operate properly, its voltage should not exceed 5.5V.

7008S55J Features

Package / Case: PLCC
84 Pins
Operating Supply Voltage:5V
I/O Type: COMMON

7008S55J Applications

There are a lot of Integrated Device Technology (IDT)
7008S55J Memory applications.

• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card
• hard disk drive (HDD)