70125S35J Overview

As far as memory types are concerned, RAM, SRAM is considered to be its memory type. In the case of PLCC, it is embedded within the case. On the chip, there are 52 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 5V. The memory device has an 52-pin package, which encloses it in a small package. I have noticed that the memory device has 52 pins, which indicates that it has 52 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 250mA. The memory chip has 2 ports for granting read/write access to one memory address. There is only a single power supply required for this memory chip. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below 0°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 70°C, otherwise damage to the part may occur as a result of overheating. In most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 4.5V volts. The operating voltage shall not exceed 5.5V.

70125S35J Features

Package / Case: PLCC
52 Pins
Operating Supply Voltage:5V
I/O Type: COMMON

70125S35J Applications

There are a lot of Integrated Device Technology (IDT)
70125S35J Memory applications.

• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM