Welcome to Hotenda.com Online Store!

logo
userjoin
Home

7016L25PF8

7016L25PF8

7016L25PF8

Integrated Device Technology (IDT)

5V V Surface Mount 80 Pin Memory IC 144 kb kb 14mm mm 220mA mA 9b b

SOT-23

7016L25PF8 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 7 Weeks
Mount Surface Mount
Package / Case TQFP
Number of Pins 80
Published 2009
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 80
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature SEMAPHORE; INTERRUPT FLAG; AUTOMATIC POWER DOWN; LOW POWER STANDBY MODE
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 80
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Interface Parallel
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Memory Size 18kB
Number of Ports 2
Nominal Supply Current 220mA
Memory Type RAM, SDR, SRAM
Access Time 25 ns
Organization 16KX9
Output Characteristics 3-STATE
Address Bus Width 14b
Density 144 kb
Standby Current-Max 0.005A
I/O Type COMMON
Sync/Async Asynchronous
Word Size 9b
Length 14mm
Height Seated (Max) 1.6mm
Width 14mm
Thickness 1.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead
7016L25PF8 Product Details

7016L25PF8 Overview


There is a memory type RAM, SDR, SRAM for this type of device. The file is embedded in a TQFP case. This chip has an 18kB size of memory on it, so a lot of data can be stored on it. The chip contains 80 terminations. As many as 1 functions are supported for comprehensive working. An 5V supply is required for this ic memory chip to operate properly. A package of 80 pins is used to protect this memory device. The memory device has 80 pins, which means that it has 80 memory locations, which indicates it is an 80-bit device. This memory runs on an 5V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 220mA. Although it has all the merits this chip has, it is also equipped with SEMAPHORE; INTERRUPT FLAG; AUTOMATIC POWER DOWN; LOW POWER STANDBY MODE to give a performance boost to the system. Each memory address is accessed by one of 2 ports on this chip. The power supply needed for this memory chip is only 5V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 4.5V. A maximum voltage of 5.5V shall be allowed for its operating voltage.

7016L25PF8 Features


Package / Case: TQFP
80 Pins
Operating Supply Voltage:5V
Additional Feature:SEMAPHORE; INTERRUPT FLAG; AUTOMATIC POWER DOWN; LOW POWER STANDBY MODE
I/O Type: COMMON


7016L25PF8 Applications


There are a lot of Integrated Device Technology (IDT)
7016L25PF8 Memory applications.


  • personal computers
  • servers
  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders
  • embedded logic

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News