5V V Surface Mount 84 Pin Memory IC 64 kb kb 29.21mm mm 265mA mA 16b b
SOT-23
7024S25J Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
PLCC
Number of Pins
84
Published
2013
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
84
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
J BEND
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
5V
Pin Count
84
Operating Supply Voltage
5V
Power Supplies
5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Memory Size
8kB
Number of Ports
2
Nominal Supply Current
265mA
Memory Type
RAM, SDR, SRAM
Access Time
25 ns
Organization
4KX16
Output Characteristics
3-STATE
Address Bus Width
24b
Density
64 kb
Standby Current-Max
0.015A
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
16b
Length
29.21mm
Height Seated (Max)
4.57mm
Width
29.21mm
Thickness
3.63mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
7024S25J Product Details
7024S25J Overview
As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In the case of PLCC, it is embedded within the case. A memory chip with a capacity of 8kB is used on this device. On the chip, there are 84 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 5V. The memory device has an 84-pin package, which encloses it in a small package. I have noticed that the memory device has 84 pins, which indicates that it has 84 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 265mA. The memory chip also offers INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN to level up system performance despite its merits. The memory chip has 2 ports for granting read/write access to one memory address. There is only a single power supply required for this memory chip. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below 0°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 70°C, otherwise damage to the part may occur as a result of overheating. In most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 4.5V volts. The operating voltage shall not exceed 5.5V.