In this case, the memory type of the device can be classified as RAM, SDR, SRAM. An embedded PLCC case surrounds memory ics. It is estimated that the memory size on the chip is 16kB. It is planted on the chip with 84 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 5V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 84 pins that allows it to be connected to a computer. The memory device has a total of 84 pins, thus indicating that it has a total of 84 memory locations. It is noted that the operating supply voltage of this memory is 5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 320mA for its nominal supply current when it comes to the memory component. This chip is not only loaded with advantages, but it also comes with INTERRUPT FLAG; AUTOMATIC POWER-DOWN; SEMAPHORE; BATTERY BACKUP, which boosts the performance of your system. Several ports on this chip are used to access one memory address for reading and writing. In terms of power requirements, this memory chip uses only 5V . I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than -40°C. The temperature should not exceed 85°C degrees Celsius. SRAMs components are usually considered types of this component. This memory ics should not be operated with a voltage below 4.5V volts at the minimum. There shall be a voltage limit of 5.5V for its operation.