5V V Surface Mount 84 Pin Memory IC 256 kb kb 29.21mm mm 315mA mA 16b b
SOT-23
7026S20J Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
PLCC
Number of Pins
84
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
84
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
J BEND
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
5V
Pin Count
84
Operating Supply Voltage
5V
Power Supplies
5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Memory Size
32kB
Number of Ports
2
Nominal Supply Current
315mA
Memory Type
RAM, SDR, SRAM
Access Time
20 ns
Organization
16KX16
Output Characteristics
3-STATE
Address Bus Width
28b
Density
256 kb
Standby Current-Max
0.015A
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
16b
Length
29.21mm
Width
29.21mm
Thickness
3.63mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
7026S20J Product Details
7026S20J Overview
A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. Embedded in the PLCC case, memory ics is a single file. On the chip, there is an 32kB memory, which is the size of the chip's memory. A total of 84 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 5V will be necessary. A 84-pin package containing this memory device is used to house this device. The memory device in question has 84 pins, thus indicating that it has 84 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 5V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 315mA for this memory component. 2 ports allow read/write access to one memory address in this chip. As for power supplies, this memory chip requires just 5V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 4.5V. An operating voltage of no more than 5.5V is required.