5V V Surface Mount 100 Pin Memory IC 512 kb kb 14mm mm 255mA mA 16b b
SOT-23
7027L35PF8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3
Number of Terminations
100
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
0.5mm
[email protected] Reflow Temperature-Max (s)
20
Pin Count
100
Operating Supply Voltage
5V
Power Supplies
5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Memory Size
64kB
Number of Ports
2
Nominal Supply Current
255mA
Memory Type
RAM, SDR, SRAM
Access Time
35 ns
Output Characteristics
3-STATE
Address Bus Width
15b
Density
512 kb
Standby Current-Max
0.015A
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
16b
Height Seated (Max)
1.6mm
Length
14mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
7027L35PF8 Product Details
7027L35PF8 Overview
In terms of its memory type, it can be classified as RAM, SDR, SRAM. The file is embedded in a TQFP case. 64kB is the chip's memory size. 100 terminations are planted on the chip. It supports up to 1 functions for comprehensive operation. A voltage of 5V is required for the operation of this memory device. In this ic memory chip, there is an 100-pin package that encloses the device. A memory device with 100 pins means that it contains 100 memory locations, indicating that it has 100 pins. The operating supply voltage of this memory chip is noted to be 5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. As far as the nominal supply current of this memory component is concerned, it is rated at 255mA. It also features INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE to boost system performance despite all its merits. This memory chip has 2 ports for accessing one memory address via read or write. As for power supplies, this memory chip requires just 5V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. A minimum operating temperature of 0°C must be met by this device. As a general rule, memory ics is recommended that the product be operated at temperatures no higher than 70°Cc, otherwise, damage could be done to it. The component is usually referred to as a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 4.5V volts. Its operating voltage shall not exceed 5.5V.