7028L20PFGI8

join

new-10%

Manufacturer part number:7028L20PFGI8

Manufacturer:Integrated Device Technology (IDT)

Description:100 Pin Memory IC 1 Mb kb 14mm mm

Case Package:SOT-23

Datasheet:7028L20PFGI8 Datasheet

RoHs Status:non-compliant

Name	Value
Type	Parameter
Factory Lead Time	7 Weeks
Package / Case	TQFP
Surface Mount	YES
Number of Pins	100
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	100
Terminal Finish	MATTE TIN
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Technology	CMOS
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Pin Count	100
Operating Supply Voltage	5V
Temperature Grade	INDUSTRIAL
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Memory Size	128kB
Number of Ports	2
Memory Type	RAM, SDR, SRAM
Access Time	20 ns
Organization	64KX16
Address Bus Width	32b
Density	1 Mb
Length	14mm
Height Seated (Max)	1.6mm
Width	14mm
Thickness	1.4mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

Quantity	Unit Price	Ext. Price
750	$50.67720	$38007.9

7028L20PFGI8 Overview

As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In the case of TQFP, it is embedded within the case. A memory chip with a capacity of 128kB is used on this device. On the chip, there are 100 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 5V. The memory device has an 100-pin package, which encloses it in a small package. I have noticed that the memory device has 100 pins, which indicates that it has 100 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. The memory chip has 2 ports for granting read/write access to one memory address. Temperatures below -40°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 85°C, otherwise damage to the part may occur as a result of overheating. It is recommended that this part be supplied with at least 4.5V volts. The operating voltage shall not exceed 5.5V.