7050S35G Overview

As far as memory types are concerned, RAM, SRAM is considered to be its memory type. On the chip, there are 108 terminations that are planted. In order to function properly, this ic memory chip should be powered by a voltage of 5V. The memory device has an 108-pin package, which encloses it in a small package. I have noticed that the memory device has 108 pins, which indicates that it has 108 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. In this chip, the Through Hole mounting method is used, a straightforward, high-efficiency mounting method. The memory chip has 4 ports for granting read/write access to one memory address. There is only a single power supply required for this memory chip. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below 0°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 70°C, otherwise damage to the part may occur as a result of overheating. As far as the supply current is concerned, it can be operated with a maximum of 0.335mA of current

7050S35G Features

108 Pins
Operating Supply Voltage:5V
I/O Type: COMMON

7050S35G Applications

There are a lot of Integrated Device Technology (IDT)
7050S35G Memory applications.

• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM