5V V Surface Mount 68 Pin Memory IC 36 kb kb 24mm mm 290mA mA 9b b
SOT-23
70914S20J8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
PLCC
Number of Pins
68
Packaging
Tape & Reel
Published
2010
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
68
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE; SELF TIMED WRITE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
J BEND
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
5V
Frequency
50MHz
Pin Count
68
Operating Supply Voltage
5V
Power Supplies
5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Number of Ports
2
Nominal Supply Current
290mA
Memory Type
RAM, SRAM
Access Time
20 ns
Organization
4KX9
Output Characteristics
3-STATE
Address Bus Width
12b
Density
36 kb
Standby Current-Max
0.015A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
9b
Length
24mm
Height Seated (Max)
4.57mm
Width
24mm
Thickness
3.63mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
70914S20J8 Product Details
70914S20J8 Overview
There is a memory type RAM, SRAM for this type of device. The case comes in the Tape & Reel style. The file is embedded in a PLCC case. The chip contains 68 terminations. As many as 1 functions are supported for comprehensive working. An 5V supply is required for this ic memory chip to operate properly. A package of 68 pins is used to protect this memory device. The memory device has 68 pins, which means that it has 68 memory locations, which indicates it is an 68-bit device. This memory runs on an 5V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 290mA. Although it has all the merits this chip has, it is also equipped with AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE; SELF TIMED WRITE to give a performance boost to the system. Each memory address is accessed by one of 2 ports on this chip. The power supply needed for this memory chip is only 5V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 4.5V. A maximum voltage of 5.5V shall be allowed for its operating voltage. As a result of the frequency of this memory chip, data can be processed at a rate of 50MHz.
70914S20J8 Features
Package / Case: PLCC 68 Pins Operating Supply Voltage:5V Additional Feature:AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE; SELF TIMED WRITE I/O Type: COMMON Freguency at 50MHz 50MHz terminals
70914S20J8 Applications
There are a lot of Integrated Device Technology (IDT) 70914S20J8 Memory applications.