5V V Surface Mount 80 Pin Memory IC 36 kb kb 14mm mm 290mA mA 9b b
SOT-23
70914S25PF Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
80
Published
2010
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
80
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
AUTOMATIC POWER-DOWN
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
0.65mm
Frequency
40MHz
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
80
Operating Supply Voltage
5V
Power Supplies
5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Memory Size
4.5kB
Number of Ports
2
Nominal Supply Current
290mA
Memory Type
RAM, SDR, SRAM
Access Time
25 ns
Organization
4KX9
Output Characteristics
3-STATE
Address Bus Width
24b
Density
36 kb
Standby Current-Max
0.015A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
9b
Length
14mm
Height Seated (Max)
1.6mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
70914S25PF Product Details
70914S25PF Overview
In this case, the memory type of the device can be classified as RAM, SDR, SRAM. An embedded TQFP case surrounds memory ics. It is estimated that the memory size on the chip is 4.5kB. It is planted on the chip with 80 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 5V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 80 pins that allows it to be connected to a computer. The memory device has a total of 80 pins, thus indicating that it has a total of 80 memory locations. It is noted that the operating supply voltage of this memory is 5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 290mA for its nominal supply current when it comes to the memory component. This chip is not only loaded with advantages, but it also comes with AUTOMATIC POWER-DOWN, which boosts the performance of your system. Several ports on this chip are used to access one memory address for reading and writing. In terms of power requirements, this memory chip uses only 5V . I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than 0°C. The temperature should not exceed 70°C degrees Celsius. This memory ics should not be operated with a voltage below 4.5V volts at the minimum. There shall be a voltage limit of 5.5V for its operation. Using this memory chip, you will be able to process data at a speed of 40MHz times per second.
70914S25PF Features
Package / Case: TQFP 80 Pins Operating Supply Voltage:5V Additional Feature:AUTOMATIC POWER-DOWN I/O Type: COMMON Freguency at 40MHz 40MHz terminals
70914S25PF Applications
There are a lot of Integrated Device Technology (IDT) 70914S25PF Memory applications.