5V V Surface Mount 100 Pin Memory IC 256 kb kb 14mm mm 345mA mA 16b b
SOT-23
709269S12PF8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
100
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
FLOW-THROUGH OR PIPELINED ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
0.5mm
Frequency
33.3MHz
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
100
Operating Supply Voltage
5V
Power Supplies
5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Memory Size
32kB
Number of Ports
2
Nominal Supply Current
345mA
Memory Type
RAM, SDR, SRAM
Access Time
12 ns
Organization
16KX16
Output Characteristics
3-STATE
Address Bus Width
28b
Density
256 kb
Standby Current-Max
0.015A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
16b
Length
14mm
Height Seated (Max)
1.6mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
709269S12PF8 Product Details
709269S12PF8 Overview
As far as its memory type goes, it falls into the RAM, SDR, SRAM category. TQFP case encloses it. There is 32kB of memory on the chip. There are 100 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 5V volt power supply in order to operate properly. In this ic memory chip, there is an 100-pin package that encloses the device. It is worth noting that this memory device has 100 pins, which indicates it has 100 memory locations. This memory chip has an operating supply voltage of 5V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 345mA. Despite all its benefits, this memory chip also offers FLOW-THROUGH OR PIPELINED ARCHITECTURE for improved system performance. Using 2 ports, a single memory address can be read and/or written. As for the power supply, this memory chip only needs 5V . A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least 0°C. Temperatures over 70°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 4.5V volts. The operating voltage of the memory ics shall not exceed 5.5V. There is an 33.3MHz frequency with which this memory chip processes data.
709269S12PF8 Features
Package / Case: TQFP 100 Pins Operating Supply Voltage:5V Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE I/O Type: COMMON Freguency at 33.3MHz 33.3MHz terminals
709269S12PF8 Applications
There are a lot of Integrated Device Technology (IDT) 709269S12PF8 Memory applications.