709289L12PF8

Name	Value
Type	Parameter
Factory Lead Time	7 Weeks
Mount	Surface Mount
Package / Case	TQFP
Number of Pins	100
Published	2009
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	100
Terminal Finish	Tin/Lead (Sn85Pb15)
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Additional Feature	FLOW-THROUGH OR PIPELINED ARCHITECTURE
Subcategory	SRAMs
Technology	CMOS
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Frequency	33.3MHz
Time@Peak Reflow Temperature-Max (s)	20
Pin Count	100
Operating Supply Voltage	5V
Power Supplies	5V
Temperature Grade	COMMERCIAL
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Memory Size	128kB
Number of Ports	2
Nominal Supply Current	355mA
Memory Type	RAM, SDR, SRAM
Access Time	12 ns
Organization	64KX16
Output Characteristics	3-STATE
Address Bus Width	16b
Density	1 Mb
Standby Current-Max	0.003A
I/O Type	COMMON
Sync/Async	Synchronous
Word Size	16b
Length	14mm
Height Seated (Max)	1.6mm
Width	14mm
Thickness	1.4mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Contains Lead

Name

Value

Type

Parameter

Factory Lead Time

7 Weeks

Mount

Surface Mount

Package / Case

TQFP

Number of Pins

100

Published

2009

JESD-609 Code

Pbfree Code

Part Status

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

100

Terminal Finish

Tin/Lead (Sn85Pb15)

Max Operating Temperature

70°C

Min Operating Temperature

0°C

Additional Feature

FLOW-THROUGH OR PIPELINED ARCHITECTURE

Subcategory

SRAMs

Technology

CMOS

Terminal Position

QUAD

Terminal Form

GULL WING

Peak Reflow Temperature (Cel)

240

Number of Functions

Supply Voltage

Terminal Pitch

0.5mm

Frequency

33.3MHz

Time@Peak Reflow Temperature-Max (s)

Pin Count

100

Operating Supply Voltage

Power Supplies

Temperature Grade

COMMERCIAL

Interface

Parallel

Max Supply Voltage

5.5V

Min Supply Voltage

4.5V

Memory Size

128kB

Number of Ports

Nominal Supply Current

355mA

Memory Type

RAM, SDR, SRAM

Access Time

12 ns

Organization

64KX16

Output Characteristics

3-STATE

Address Bus Width

16b

Density

1 Mb

Standby Current-Max

0.003A

I/O Type

COMMON

Sync/Async

Synchronous

Word Size

16b

Length

14mm

Height Seated (Max)

1.6mm

Width

14mm

Thickness

1.4mm

Radiation Hardening

RoHS Status

RoHS Compliant

Lead Free

Contains Lead

709289L12PF8 Overview

As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In the case of TQFP, it is embedded within the case. A memory chip with a capacity of 128kB is used on this device. On the chip, there are 100 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 5V. The memory device has an 100-pin package, which encloses it in a small package. I have noticed that the memory device has 100 pins, which indicates that it has 100 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 355mA. The memory chip also offers FLOW-THROUGH OR PIPELINED ARCHITECTURE to level up system performance despite its merits. The memory chip has 2 ports for granting read/write access to one memory address. There is only a single power supply required for this memory chip. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below 0°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 70°C, otherwise damage to the part may occur as a result of overheating. In most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 4.5V volts. The operating voltage shall not exceed 5.5V. A ic memory chip like this one processes data at a frequency of 33.3MHz bits per second.

709289L12PF8 Features

Package / Case: TQFP
100 Pins
Operating Supply Voltage:5V
Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 33.3MHz
33.3MHz terminals

709289L12PF8 Applications

There are a lot of Integrated Device Technology (IDT)
709289L12PF8 Memory applications.

servers
supercomputers
telecommunications
workstations,
DVD disk buffer
data buffer
nonvolatile BIOS memory
Camcorders
embedded logic
eDRAM