Welcome to Hotenda.com Online Store!

logo
userjoin
Home

709349L6PF

709349L6PF

709349L6PF

Integrated Device Technology (IDT)

5V V Surface Mount 100 Pin Memory IC 72 kb kb 14mm mm 430mA mA 18b b

SOT-23

709349L6PF Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 7 Weeks
Mount Surface Mount
Package / Case TQFP
Number of Pins 100
Published 2008
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature FLOW-THROUGH OR PIPELINED ARCHITECTURE
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.5mm
Frequency 52.6MHz
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 100
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Interface Parallel
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Memory Size 9kB
Number of Ports 2
Nominal Supply Current 430mA
Memory Type RAM, SDR, SRAM
Access Time 6.5 ns
Organization 4KX18
Output Characteristics 3-STATE
Address Bus Width 24b
Density 72 kb
Standby Current-Max 0.003A
I/O Type COMMON
Sync/Async Synchronous
Word Size 18b
Length 14mm
Height Seated (Max) 1.6mm
Width 14mm
Thickness 1.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead
709349L6PF Product Details

709349L6PF Overview


A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. Embedded in the TQFP case, memory ics is a single file. On the chip, there is an 9kB memory, which is the size of the chip's memory. A total of 100 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 5V will be necessary. A 100-pin package containing this memory device is used to house this device. The memory device in question has 100 pins, thus indicating that it has 100 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 5V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 430mA for this memory component. This chip features all the merits of a conventional chip, but it also features FLOW-THROUGH OR PIPELINED ARCHITECTURE to improve system performance. 2 ports allow read/write access to one memory address in this chip. As for power supplies, this memory chip requires just 5V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Ideally, this part should be supplied with a voltage of at least 4.5V. An operating voltage of no more than 5.5V is required. A frequency of 52.6MHz is used to process the data on this memory chip.

709349L6PF Features


Package / Case: TQFP
100 Pins
Operating Supply Voltage:5V
Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 52.6MHz
52.6MHz terminals


709349L6PF Applications


There are a lot of Integrated Device Technology (IDT)
709349L6PF Memory applications.


  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders
  • embedded logic
  • eDRAM
  • graphics card

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News