70P255L90BYGI Overview

As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In addition, memory ics is available in a Bulk case as well. In the case of TFBGA, it is embedded within the case. There is an 16kB memory capacity on the chip. 100 terminations are planted on the chip. As many as 1 functions are supported for comprehensive working. An 1.8V supply is required for this ic memory chip to operate properly. This memory device is enclosed in a 100-pin package. The memory device has a total of 100 pins, thus indicating that it has a total of 100 memory locations. In this chip, there are 2 ports providing read and/or write access to one memory address. This device has COMMON-bit memory mapped I/O port addresses. There must not be a minimum operating temperature of less than -40°C for this device. The part should not be operated at temperatures above 85°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. This device can be operated from a maximum supply current of 0.06mA under ideal conditions. SRAMs-types are usually considered to be this component. This memory ics requires a minimum voltage of 1.8V. This part requires a minimum voltage of 3V.

70P255L90BYGI Features

Package / Case: TFBGA
100 Pins
I/O Type: COMMON

70P255L90BYGI Applications

There are a lot of Integrated Device Technology (IDT) 70P255L90BYGI Memory applications.

• graphics card
• hard disk drive (HDD)
• eSRAM
• servers
• networking
• workstations,
• multimedia computers
• eDRAM
• cell phones
• telecommunications