70T3519S133BF8 Overview

RAM, SDR, SRAM is the type of memory it has. The chip has an 1.1MB memory. The chip has 208 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 2.5V of power. The memory device is enclosed in a package with an 208-pin connector. There are 208 pins on this memory device, which indicates it has 208 memory locations in it. A voltage of 2.5V is noted as the operating supply voltage for this memory. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component is rated at 370mA. Despite all its merits, this chip also features FLOW-THROUGH OR PIPELINED ARCHITECTURE to boost system performance. A memory address is accessed through 2 ports on this chip. I/O port addresses on this device are mapped to memory addresses of COMMON bits. This device must operate at a minimum temperature of 0°C. Temperatures no higher than 70°C degrees Celsius are recommended for operation. It is usually considered a type of SRAMs component. It is recommended that the minimum supply voltage for this part be no less than 2.4V. Ideally, this part should be supplied with a voltage of at least 2.6V. Data is processed by this memory ics at a frequency of 133MHz. A maximum current of 370mA can be used to run it. This Memory chip has a maximum frequency of 133MHz.

70T3519S133BF8 Features

208 Pins
Operating Supply Voltage:2.5V
Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 133MHz
133MHz terminals

70T3519S133BF8 Applications

There are a lot of Integrated Device Technology (IDT)
70T3519S133BF8 Memory applications.

• cell phones
• eSRAM
• mainframes
• multimedia computers
• networking
• personal computers
• servers
• supercomputers
• telecommunications
• workstations,