Surface Mount 256 Pin Memory IC 18 Mb kb 17mm mm 740mA mA 36b b
SOT-23
70T3539MS133BC Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Number of Pins
256
Packaging
Bulk
Published
2013
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
256
Terminal Finish
Tin/Lead (Sn63Pb37)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
FLOW-THROUGH OR PIPELINED ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
BOTTOM
Terminal Form
BALL
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
2.5V
Terminal Pitch
1mm
Frequency
133MHz
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
256
Operating Supply Voltage
2.5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
2.6V
Min Supply Voltage
2.4V
Memory Size
2.3MB
Number of Ports
2
Nominal Supply Current
740mA
Memory Type
RAM, SDR, SRAM
Frequency (Max)
133MHz
Access Time
4.2 ns
Output Characteristics
3-STATE
Address Bus Width
38b
Density
18 Mb
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
36b
Length
17mm
Height Seated (Max)
1.7mm
Width
17mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$240.67000
$240.67
12
$209.77667
$2517.32004
30
$209.19933
$6275.9799
70T3539MS133BC Product Details
70T3539MS133BC Overview
As far as its memory type goes, it falls into the RAM, SDR, SRAM category. You can get memory ics in a Bulk case. There is 2.3MB of memory on the chip. There are 256 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 2.5V volt power supply in order to operate properly. In this ic memory chip, there is an 256-pin package that encloses the device. It is worth noting that this memory device has 256 pins, which indicates it has 256 memory locations. This memory chip has an operating supply voltage of 2.5V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 740mA. Despite all its benefits, this memory chip also offers FLOW-THROUGH OR PIPELINED ARCHITECTURE for improved system performance. Using 2 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least 0°C. Temperatures over 70°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 2.4V volts. The operating voltage of the memory ics shall not exceed 2.6V. There is an 133MHz frequency with which this memory chip processes data. In this Memory chip, the maximum frequency is 133MHz.
70T3539MS133BC Features
256 Pins Operating Supply Voltage:2.5V Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE I/O Type: COMMON Freguency at 133MHz 133MHz terminals
70T3539MS133BC Applications
There are a lot of Integrated Device Technology (IDT) 70T3539MS133BC Memory applications.