Surface Mount 256 Pin Memory IC 4.5 Mb kb 17mm mm 450mA mA 36b b
SOT-23
70T3599S133BCI Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Number of Pins
256
Published
2004
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
256
Terminal Finish
Tin/Lead (Sn63Pb37)
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Additional Feature
FLOW-THROUGH OR PIPELINED ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
BOTTOM
Terminal Form
BALL
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
2.5V
Terminal Pitch
1mm
Frequency
133MHz
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
256
Operating Supply Voltage
2.5V
Temperature Grade
INDUSTRIAL
Interface
Parallel
Max Supply Voltage
2.6V
Min Supply Voltage
2.4V
Memory Size
512kB
Number of Ports
2
Nominal Supply Current
450mA
Memory Type
RAM, SDR, SRAM
Frequency (Max)
133MHz
Access Time
15 ns
Output Characteristics
3-STATE
Address Bus Width
34b
Density
4.5 Mb
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
36b
Length
17mm
Height Seated (Max)
1.5mm
Width
17mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
Pricing & Ordering
Quantity
Unit Price
Ext. Price
12
$118.69583
$1424.34996
70T3599S133BCI Product Details
70T3599S133BCI Overview
A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. On the chip, there is an 512kB memory, which is the size of the chip's memory. A total of 256 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 2.5V will be necessary. A 256-pin package containing this memory device is used to house this device. The memory device in question has 256 pins, thus indicating that it has 256 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 2.5V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 450mA for this memory component. This chip features all the merits of a conventional chip, but it also features FLOW-THROUGH OR PIPELINED ARCHITECTURE to improve system performance. 2 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 2.4V. An operating voltage of no more than 2.6V is required. A frequency of 133MHz is used to process the data on this memory chip. A ic memory chip with this frequency has a maximum speed of 133MHz.
70T3599S133BCI Features
256 Pins Operating Supply Voltage:2.5V Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE I/O Type: COMMON Freguency at 133MHz 133MHz terminals
70T3599S133BCI Applications
There are a lot of Integrated Device Technology (IDT) 70T3599S133BCI Memory applications.