Welcome to Hotenda.com Online Store!

logo
userjoin
Home

70V06S15J8

70V06S15J8

70V06S15J8

Integrated Device Technology (IDT)

Surface Mount -- 68 Pin Memory IC -- Series IDT70V06 128 kb kb 24mm mm 215mA mA 8b b

SOT-23

70V06S15J8 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 7 Weeks
Mount Surface Mount
Package / Case PLCC
Mounting Type Surface Mount
Number of Pins 68
Supplier Device Package 68-PLCC (24.21x24.21)
Published 2008
Operating Temperature 0°C ~ 70°C (TA)
Series --
Packaging Tape & Reel (TR)
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 68
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Voltage - Supply 3 V ~ 3.6 V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 3.3V
Base Part Number IDT70V06
Pin Count 68
Operating Supply Voltage 3.3V
Temperature Grade COMMERCIAL
Interface Parallel
Max Supply Voltage 3.6V
Min Supply Voltage 3V
Memory Size 16kB
Number of Ports 2
Nominal Supply Current 215mA
Memory Type RAM, SDR, SRAM
Access Time 15 ns
Memory Format SRAM
Memory Interface Parallel
Organization 16KX8
Output Characteristics 3-STATE
Write Cycle Time - Word, Page 15ns
Address Bus Width 28b
Density 128 kb
Standby Current-Max 0.005A
I/O Type COMMON
Sync/Async Asynchronous
Word Size 8b
Standby Voltage-Min 2V
Length 24mm
Height Seated (Max) 4.57mm
Width 24mm
Thickness 3.63mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead
70V06S15J8 Product Details

70V06S15J8 Overview


As far as its memory type goes, it falls into the RAM, SDR, SRAM category. You can get memory ics in a Tape & Reel (TR) case. PLCC case encloses it. There is 16kB of memory on the chip. The device uses a mainstream SRAM-format memory. Suitable for use in a wide range of demanding applications, this device offers an extended operating temperature range of 0°C ~ 70°C (TA). There is a voltage range of 3 V ~ 3.6 V for the supply voltage. It is recommended that the mounting type be Surface Mount. There are 68 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. When choosing similar parts, IDT70V06 is frequently referred to as the device's base part number. In this ic memory chip, there is an 68-pin package that encloses the device. It is worth noting that this memory device has 68 pins, which indicates it has 68 memory locations. This memory chip has an operating supply voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 215mA. Using 2 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. This part is part of the -- series of memory devices, which play a key role in its target applications. Memory ics must operate at a temperature of at least 0°C. Temperatures over 70°C°C are not recommended. If this part is to be used, the minimum supply voltage should not be less than 3V volts. The operating voltage of the memory ics shall not exceed 3.6V.

70V06S15J8 Features


Package / Case: PLCC
68 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON


70V06S15J8 Applications


There are a lot of Integrated Device Technology (IDT)
70V06S15J8 Memory applications.


  • multimedia computers
  • networking
  • personal computers
  • servers
  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News