Surface Mount 80 Pin Memory IC 256 kb kb 14mm mm 140mA mA 8b b
SOT-23
70V07S55PF Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
80
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
80
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.65mm
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
80
Qualification Status
Not Qualified
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
3.6V
Min Supply Voltage
3V
Memory Size
32kB
Number of Ports
2
Nominal Supply Current
140mA
Memory Type
RAM, SDR, SRAM
Access Time
55 ns
Output Characteristics
3-STATE
Address Bus Width
30b
Density
256 kb
Standby Current-Max
0.006A
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
8b
Standby Voltage-Min
3V
Length
14mm
Height Seated (Max)
1.6mm
Width
14mm
Thickness
1.4mm
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
70V07S55PF Product Details
70V07S55PF Overview
There is a memory type RAM, SDR, SRAM for this type of device. The file is embedded in a TQFP case. This chip has an 32kB size of memory on it, so a lot of data can be stored on it. The chip contains 80 terminations. As many as 1 functions are supported for comprehensive working. An 3.3V supply is required for this ic memory chip to operate properly. A package of 80 pins is used to protect this memory device. The memory device has 80 pins, which means that it has 80 memory locations, which indicates it is an 80-bit device. This memory runs on an 3.3V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 140mA. Although it has all the merits this chip has, it is also equipped with INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN to give a performance boost to the system. Each memory address is accessed by one of 2 ports on this chip. An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 3V. A maximum voltage of 3.6V shall be allowed for its operating voltage.