Welcome to Hotenda.com Online Store!

logo
userjoin
Home

70V24L55PFI

70V24L55PFI

70V24L55PFI

Integrated Device Technology (IDT)

Surface Mount 100 Pin Memory IC 64 kb kb 14mm mm 16b b

SOT-23

70V24L55PFI Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 7 Weeks
Mount Surface Mount
Package / Case TQFP
Number of Pins 100
Packaging Bulk
Published 2008
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 100
Operating Supply Voltage 3.3V
Temperature Grade INDUSTRIAL
Interface Parallel
Max Supply Voltage 3.6V
Min Supply Voltage 3V
Memory Size 8kB
Number of Ports 2
Memory Type RAM, SDR, SRAM
Supply Current-Max 0.17mA
Access Time 55 ns
Organization 4KX16
Output Characteristics 3-STATE
Address Bus Width 24b
Density 64 kb
Standby Current-Max 0.005A
I/O Type COMMON
Sync/Async Asynchronous
Word Size 16b
Standby Voltage-Min 3V
Length 14mm
Height Seated (Max) 1.6mm
Width 14mm
Thickness 1.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead
70V24L55PFI Product Details

70V24L55PFI Overview


A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Bulk case as well. Embedded in the TQFP case, memory ics is a single file. On the chip, there is an 8kB memory, which is the size of the chip's memory. A total of 100 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 100-pin package containing this memory device is used to house this device. The memory device in question has 100 pins, thus indicating that it has 100 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. This chip features all the merits of a conventional chip, but it also features INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN to improve system performance. 2 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. In order to operate your device, you will need to provide a maximum supply current of 0.17mA. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 3V. An operating voltage of no more than 3.6V is required.

70V24L55PFI Features


Package / Case: TQFP
100 Pins
Operating Supply Voltage:3.3V
Additional Feature:INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN
I/O Type: COMMON


70V24L55PFI Applications


There are a lot of Integrated Device Technology (IDT)
70V24L55PFI Memory applications.


  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders
  • embedded logic
  • eDRAM
  • graphics card

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News