Surface Mount 100 Pin Memory IC 128 kb kb 14mm mm 215mA mA 16b b
SOT-23
70V25S15PF8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Published
2008
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3
Number of Terminations
100
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
[email protected] Reflow Temperature-Max (s)
20
Pin Count
100
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
3.6V
Min Supply Voltage
3V
Memory Size
16kB
Number of Ports
2
Nominal Supply Current
215mA
Memory Type
RAM, SDR, SRAM
Access Time
15 ns
Organization
8KX16
Output Characteristics
3-STATE
Address Bus Width
26b
Density
128 kb
Standby Current-Max
0.005A
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
16b
Standby Voltage-Min
3V
Height Seated (Max)
1.6mm
Length
14mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
70V25S15PF8 Product Details
70V25S15PF8 Overview
A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. The case is embedded in TQFP. It is estimated that the memory size on the chip is 16kB. There are 100 terminations on the chip. The comprehensive working procedure is supported by 1 functions in this part. A voltage of 3.3V is required for the operation of this memory device. A package of 100 pins is used to protect this memory device. There are 100 pins on this memory device, which indicates it has 100 memory locations in it. According to the datasheet, this memory chip operates at an operating voltage of 3.3V. Using Surface Mount mounting, this chip offers straightforward and high-efficiency mounting. It is rated for a nominal supply current of 215mA for this memory component. A memory address is accessed through 2 ports on this chip. In addition to this device, there are COMMON-bit memory mapped I/O port addresses on this device. This device must operate at a minimum temperature of 0°C. The temperature should not exceed 70°C degrees Celsius. It is usually considered a type of SRAMs component. It is recommended that this part be supplied with at least 3V volts. Ideally, this part should be supplied with a voltage of at least 3.6V.