70V3389S5BC8 Overview

RAM, SRAM is the type of memory it has. There is a Tape & Reel case available. The chip has 256 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 3.3V of power. The memory device is enclosed in a package with an 256-pin connector. There are 256 pins on this memory device, which indicates it has 256 memory locations in it. A voltage of 3.3V is noted as the operating supply voltage for this memory. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component is rated at 360mA. A memory address is accessed through 2 ports on this chip. I/O port addresses on this device are mapped to memory addresses of COMMON bits. This device must operate at a minimum temperature of 0°C. Temperatures no higher than 70°C degrees Celsius are recommended for operation. It is usually considered a type of SRAMs component. It is recommended that the minimum supply voltage for this part be no less than 3.15V. Ideally, this part should be supplied with a voltage of at least 3.45V. Data is processed by this memory ics at a frequency of 100MHz.

70V3389S5BC8 Features

256 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
Freguency at 100MHz
100MHz terminals

70V3389S5BC8 Applications

There are a lot of Integrated Device Technology (IDT)
70V3389S5BC8 Memory applications.

• cell phones
• eSRAM
• mainframes
• multimedia computers
• networking
• personal computers
• servers
• supercomputers
• telecommunications
• workstations,