Welcome to Hotenda.com Online Store!

logo
userjoin
Home

70V3389S5PRFI8

70V3389S5PRFI8

70V3389S5PRFI8

Integrated Device Technology (IDT)

Surface Mount 128 Pin Memory IC 1.1 Mb kb 20mm mm 415mA mA 18b b

SOT-23

70V3389S5PRFI8 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 7 Weeks
Mount Surface Mount
Package / Case TQFP
Number of Pins 128
Packaging Tape & Reel
Published 2009
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 128
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature PIPELINED OUTPUT MODE; SELF-TIMED WRITE CYCLE
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Frequency 100MHz
Pin Count 128
Operating Supply Voltage 3.3V
Temperature Grade INDUSTRIAL
Interface Parallel
Max Supply Voltage 3.45V
Min Supply Voltage 3.15V
Number of Ports 2
Nominal Supply Current 415mA
Memory Type RAM, SRAM
Access Time 5 ns
Organization 64KX18
Output Characteristics 3-STATE
Address Bus Width 16b
Density 1.1 Mb
Standby Current-Max 0.03A
I/O Type COMMON
Sync/Async Synchronous
Word Size 18b
Length 20mm
Height Seated (Max) 1.6mm
Width 14mm
Thickness 1.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead
70V3389S5PRFI8 Product Details

70V3389S5PRFI8 Overview


A RAM, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel case as well. Embedded in the TQFP case, memory ics is a single file. A total of 128 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 128-pin package containing this memory device is used to house this device. The memory device in question has 128 pins, thus indicating that it has 128 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 415mA for this memory component. This chip features all the merits of a conventional chip, but it also features PIPELINED OUTPUT MODE; SELF-TIMED WRITE CYCLE to improve system performance. 2 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 3.15V. An operating voltage of no more than 3.45V is required. A frequency of 100MHz is used to process the data on this memory chip.

70V3389S5PRFI8 Features


Package / Case: TQFP
128 Pins
Operating Supply Voltage:3.3V
Additional Feature:PIPELINED OUTPUT MODE; SELF-TIMED WRITE CYCLE
I/O Type: COMMON
Freguency at 100MHz
100MHz terminals


70V3389S5PRFI8 Applications


There are a lot of Integrated Device Technology (IDT)
70V3389S5PRFI8 Memory applications.


  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders
  • embedded logic
  • eDRAM
  • graphics card

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News