Surface Mount 128 Pin Memory IC 2.3 Mb kb 20mm mm 400mA mA 18b b
SOT-23
70V3399S133PRF8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
16 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
128
Packaging
Tape & Reel
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
128
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
PIPELINED OR FLOW-THROUGH ARCHITECTURE
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
Frequency
133MHz
Pin Count
128
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
3.45V
Min Supply Voltage
3.15V
Number of Ports
2
Nominal Supply Current
400mA
Memory Type
RAM, SRAM
Access Time
15 ns
Output Characteristics
3-STATE
Address Bus Width
34b
Density
2.3 Mb
Standby Current-Max
0.03A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
18b
Length
20mm
Height Seated (Max)
1.6mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
70V3399S133PRF8 Product Details
70V3399S133PRF8 Overview
As far as its memory type goes, it falls into the RAM, SRAM category. You can get memory ics in a Tape & Reel case. TQFP case encloses it. There are 128 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. In this ic memory chip, there is an 128-pin package that encloses the device. It is worth noting that this memory device has 128 pins, which indicates it has 128 memory locations. This memory chip has an operating supply voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 400mA. Despite all its benefits, this memory chip also offers PIPELINED OR FLOW-THROUGH ARCHITECTURE for improved system performance. Using 2 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least 0°C. Temperatures over 70°C°C are not recommended. If this part is to be used, the minimum supply voltage should not be less than 3.15V volts. The operating voltage of the memory ics shall not exceed 3.45V. There is an 133MHz frequency with which this memory chip processes data.
70V3399S133PRF8 Features
Package / Case: TQFP 128 Pins Operating Supply Voltage:3.3V Additional Feature:PIPELINED OR FLOW-THROUGH ARCHITECTURE I/O Type: COMMON Freguency at 133MHz 133MHz terminals
70V3399S133PRF8 Applications
There are a lot of Integrated Device Technology (IDT) 70V3399S133PRF8 Memory applications.