Surface Mount 256 Pin Memory IC 576 kb kb 17mm mm 310mA mA 36b b
SOT-23
70V3569S6BC8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Number of Pins
256
Packaging
Tape & Reel
Published
2008
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
256
Terminal Finish
Tin/Lead (Sn63Pb37)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
PIPELINED OUTPUT MODE, SELF TIMED WRITE CYCLE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
BOTTOM
Terminal Form
BALL
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
1mm
Frequency
83.3MHz
Pin Count
256
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
3.45V
Min Supply Voltage
3.15V
Number of Ports
2
Nominal Supply Current
310mA
Memory Type
RAM, SRAM
Access Time
6 ns
Organization
16KX36
Output Characteristics
3-STATE
Address Bus Width
28b
Density
576 kb
Standby Current-Max
0.015A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
36b
Length
17mm
Height Seated (Max)
1.5mm
Width
17mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1,000
$39.99240
$39.9924
70V3569S6BC8 Product Details
70V3569S6BC8 Overview
A RAM, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel case as well. A total of 256 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 256-pin package containing this memory device is used to house this device. The memory device in question has 256 pins, thus indicating that it has 256 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 310mA for this memory component. This chip features all the merits of a conventional chip, but it also features PIPELINED OUTPUT MODE, SELF TIMED WRITE CYCLE to improve system performance. 2 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 3.15V. An operating voltage of no more than 3.45V is required. A frequency of 83.3MHz is used to process the data on this memory chip.