Surface Mount 100 Pin Memory IC 256 kb kb 14mm mm 240mA mA 8b b
SOT-23
70V9079S12PF8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Packaging
Tape & Reel
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
100
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
FLOW-THROUGH OR PIPELINED ARCHITECTURE
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
Frequency
33.3MHz
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
100
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
3.6V
Min Supply Voltage
3V
Number of Ports
2
Nominal Supply Current
240mA
Memory Type
RAM, SRAM
Access Time
25 ns
Output Characteristics
3-STATE
Address Bus Width
15b
Density
256 kb
Standby Current-Max
0.005A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
8b
Standby Voltage-Min
3V
Length
14mm
Height Seated (Max)
1.6mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
70V9079S12PF8 Product Details
70V9079S12PF8 Overview
A RAM, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel case as well. Embedded in the TQFP case, memory ics is a single file. A total of 100 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 100-pin package containing this memory device is used to house this device. The memory device in question has 100 pins, thus indicating that it has 100 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 240mA for this memory component. This chip features all the merits of a conventional chip, but it also features FLOW-THROUGH OR PIPELINED ARCHITECTURE to improve system performance. 2 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Ideally, this part should be supplied with a voltage of at least 3V. An operating voltage of no more than 3.6V is required. A frequency of 33.3MHz is used to process the data on this memory chip.
70V9079S12PF8 Features
Package / Case: TQFP 100 Pins Operating Supply Voltage:3.3V Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE I/O Type: COMMON Freguency at 33.3MHz 33.3MHz terminals
70V9079S12PF8 Applications
There are a lot of Integrated Device Technology (IDT) 70V9079S12PF8 Memory applications.