70V9159L7PFI8 Overview

There is a memory type RAM, SRAM for this type of device. The case comes in the Tape & Reel style. The file is embedded in a TQFP case. The chip contains 100 terminations. As many as 1 functions are supported for comprehensive working. An 3.3V supply is required for this ic memory chip to operate properly. A package of 100 pins is used to protect this memory device. The memory device has 100 pins, which means that it has 100 memory locations, which indicates it is an 100-bit device. This memory runs on an 3.3V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 330mA. Although it has all the merits this chip has, it is also equipped with FLOW-THROUGH OR PIPELINED ARCHITECTURE to give a performance boost to the system. Each memory address is accessed by one of 2 ports on this chip. An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an -40°C operating temperature for this device. The part should not be operated at temperatures above 85°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 3V. A maximum voltage of 3.6V shall be allowed for its operating voltage. As a result of the frequency of this memory chip, data can be processed at a rate of 45.45MHz.

70V9159L7PFI8 Features

Package / Case: TQFP
100 Pins
Operating Supply Voltage:3.3V
Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 45.45MHz
45.45MHz terminals

70V9159L7PFI8 Applications

There are a lot of Integrated Device Technology (IDT)
70V9159L7PFI8 Memory applications.

• personal computers
• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic