Surface Mount 128 Pin Memory IC 1 Mb kb 20mm mm 240mA mA 16b b
SOT-23
70V9289L9PRFI Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
128
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
128
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Additional Feature
FLOW-THROUGH OR PIPELINED ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
Frequency
40MHz
Pin Count
128
Operating Supply Voltage
3.3V
Temperature Grade
INDUSTRIAL
Interface
Parallel
Max Supply Voltage
3.6V
Min Supply Voltage
3V
Memory Size
128kB
Number of Ports
2
Nominal Supply Current
240mA
Memory Type
RAM, SDR, SRAM
Frequency (Max)
83MHz
Access Time
9 ns
Organization
64KX16
Output Characteristics
3-STATE
Address Bus Width
32b
Density
1 Mb
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
16b
Standby Voltage-Min
3V
Length
20mm
Height Seated (Max)
1.6mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
70V9289L9PRFI Product Details
70V9289L9PRFI Overview
In this case, the memory type of the device can be classified as RAM, SDR, SRAM. An embedded TQFP case surrounds memory ics. It is estimated that the memory size on the chip is 128kB. It is planted on the chip with 128 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 3.3V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 128 pins that allows it to be connected to a computer. The memory device has a total of 128 pins, thus indicating that it has a total of 128 memory locations. It is noted that the operating supply voltage of this memory is 3.3V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 240mA for its nominal supply current when it comes to the memory component. This chip is not only loaded with advantages, but it also comes with FLOW-THROUGH OR PIPELINED ARCHITECTURE, which boosts the performance of your system. Several ports on this chip are used to access one memory address for reading and writing. I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than -40°C. The temperature should not exceed 85°C degrees Celsius. SRAMs components are usually considered types of this component. This memory ics should not be operated with a voltage below 3V volts at the minimum. There shall be a voltage limit of 3.6V for its operation. Using this memory chip, you will be able to process data at a speed of 40MHz times per second. This Memory chip is capable of 83MHz max frequency.
70V9289L9PRFI Features
Package / Case: TQFP 128 Pins Operating Supply Voltage:3.3V Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE I/O Type: COMMON Freguency at 40MHz 40MHz terminals
70V9289L9PRFI Applications
There are a lot of Integrated Device Technology (IDT) 70V9289L9PRFI Memory applications.