Surface Mount 128 Pin Memory IC 1.1 Mb kb 20mm mm 250mA mA 18b b
SOT-23
70V9389L7PRF Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
128
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
128
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
-40°C
Additional Feature
FLOW-THROUGH OR PIPELINED ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
Frequency
83.3MHz
Pin Count
128
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
3.6V
Min Supply Voltage
3V
Memory Size
128kB
Number of Ports
2
Nominal Supply Current
250mA
Memory Type
RAM, SDR, SRAM
Frequency (Max)
83MHz
Access Time
7 ns
Organization
64KX18
Output Characteristics
3-STATE
Address Bus Width
32b
Density
1.1 Mb
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
18b
Standby Voltage-Min
3V
Length
20mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
70V9389L7PRF Product Details
70V9389L7PRF Overview
As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In the case of TQFP, it is embedded within the case. A memory chip with a capacity of 128kB is used on this device. On the chip, there are 128 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 3.3V. The memory device has an 128-pin package, which encloses it in a small package. I have noticed that the memory device has 128 pins, which indicates that it has 128 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 3.3V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 250mA. The memory chip also offers FLOW-THROUGH OR PIPELINED ARCHITECTURE to level up system performance despite its merits. The memory chip has 2 ports for granting read/write access to one memory address. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below -40°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 70°C, otherwise damage to the part may occur as a result of overheating. In most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 3V volts. The operating voltage shall not exceed 3.6V. A ic memory chip like this one processes data at a frequency of 83.3MHz bits per second. A memory chip of this type can operate at a maximum frequency of 83MHz.
70V9389L7PRF Features
Package / Case: TQFP 128 Pins Operating Supply Voltage:3.3V Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE I/O Type: COMMON Freguency at 83.3MHz 83.3MHz terminals
70V9389L7PRF Applications
There are a lot of Integrated Device Technology (IDT) 70V9389L7PRF Memory applications.