71256S100DB Overview

In this case, the memory type of the device can be classified as RAM, SRAM - Asynchronous. Case Bulk is available. An embedded CDIP case surrounds memory ics. It is planted on the chip with 28 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 5V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 28 pins that allows it to be connected to a computer. The memory device has a total of 28 pins, thus indicating that it has a total of 28 memory locations. It is noted that the operating supply voltage of this memory is 5V. This chip uses Through Hole mounting, a straightforward, high-efficiency method of mounting. It is rated 135mA for its nominal supply current when it comes to the memory component. Several ports on this chip are used to access one memory address for reading and writing. In terms of power requirements, this memory chip uses only 5V . I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than -55°C. The temperature should not exceed 125°C degrees Celsius. SRAMs components are usually considered types of this component. This memory ics should not be operated with a voltage below 4.5V volts at the minimum. There shall be a voltage limit of 5.5V for its operation.

71256S100DB Features

Package / Case: CDIP
28 Pins
Operating Supply Voltage:5V
I/O Type: COMMON

71256S100DB Applications

There are a lot of Integrated Device Technology (IDT)
71256S100DB Memory applications.

• networking
• personal computers
• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders