71256SA15TPG Overview

A RAM, SDR, SRAM - Asynchronous-type memory can be classified as the memory type of this device. Embedded in the PDIP case, memory ics is a single file. On the chip, there is an 32kB memory, which is the size of the chip's memory. A total of 28 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 5V will be necessary. A 28-pin package containing this memory device is used to house this device. The memory device in question has 28 pins, thus indicating that it has 28 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 5V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Through Hole mounting. There is a nominal supply current rating of 150mA for this memory component. 1 ports allow read/write access to one memory address in this chip. As for power supplies, this memory chip requires just 5V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 4.5V. An operating voltage of no more than 5.5V is required.

71256SA15TPG Features

Package / Case: PDIP
28 Pins
Operating Supply Voltage:5V
I/O Type: COMMON

71256SA15TPG Applications

There are a lot of Integrated Device Technology (IDT)
71256SA15TPG Memory applications.

• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card