Welcome to Hotenda.com Online Store!

logo
userjoin
Home

71321LA25J

71321LA25J

71321LA25J

Integrated Device Technology (IDT)

5V V Surface Mount 52 Pin Memory IC 16 kb kb 19mm mm 170mA mA 8b b

SOT-23

71321LA25J Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 7 Weeks
Mount Surface Mount
Package / Case PLCC
Number of Pins 52
Published 2005
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 52
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature INTERRUPT FLAG; AUTOMATIC POWER-DOWN; BATTERY BACKUP
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 5V
Pin Count 52
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Interface Parallel
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Memory Size 2kB
Number of Ports 2
Nominal Supply Current 170mA
Memory Type RAM, SDR, SRAM
Access Time 25 ns
Output Characteristics 3-STATE
Address Bus Width 22b
Density 16 kb
Standby Current-Max 0.0015A
I/O Type COMMON
Sync/Async Asynchronous
Word Size 8b
Standby Voltage-Min 2V
Length 19mm
Width 19mm
Thickness 3.63mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead
71321LA25J Product Details

71321LA25J Overview


In this case, the memory type of the device can be classified as RAM, SDR, SRAM. An embedded PLCC case surrounds memory ics. It is estimated that the memory size on the chip is 2kB. It is planted on the chip with 52 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 5V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 52 pins that allows it to be connected to a computer. The memory device has a total of 52 pins, thus indicating that it has a total of 52 memory locations. It is noted that the operating supply voltage of this memory is 5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 170mA for its nominal supply current when it comes to the memory component. This chip is not only loaded with advantages, but it also comes with INTERRUPT FLAG; AUTOMATIC POWER-DOWN; BATTERY BACKUP, which boosts the performance of your system. Several ports on this chip are used to access one memory address for reading and writing. In terms of power requirements, this memory chip uses only 5V . I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than 0°C. The temperature should not exceed 70°C degrees Celsius. SRAMs components are usually considered types of this component. This memory ics should not be operated with a voltage below 4.5V volts at the minimum. There shall be a voltage limit of 5.5V for its operation.

71321LA25J Features


Package / Case: PLCC
52 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; AUTOMATIC POWER-DOWN; BATTERY BACKUP
I/O Type: COMMON


71321LA25J Applications


There are a lot of Integrated Device Technology (IDT)
71321LA25J Memory applications.


  • networking
  • personal computers
  • servers
  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News