Welcome to Hotenda.com Online Store!

logo
userjoin
Home

7132LA55J8

7132LA55J8

7132LA55J8

Integrated Device Technology (IDT)

5V V Surface Mount 52 Pin Memory IC 16 kb kb 19mm mm 110mA mA 8b b

SOT-23

7132LA55J8 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 7 Weeks
Mount Surface Mount
Package / Case PLCC
Number of Pins 52
Published 2004
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 52
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature AUTOMATIC POWER-DOWN
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 5V
Pin Count 52
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Interface Parallel
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Memory Size 2kB
Number of Ports 2
Nominal Supply Current 110mA
Memory Type RAM, SDR, SRAM
Access Time 55 ns
Output Characteristics 3-STATE
Address Bus Width 22b
Density 16 kb
Standby Current-Max 0.0015A
I/O Type COMMON
Sync/Async Asynchronous
Word Size 8b
Standby Voltage-Min 2V
Length 19mm
Height Seated (Max) 4.57mm
Width 19mm
Thickness 3.63mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead
7132LA55J8 Product Details

7132LA55J8 Overview


A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. Embedded in the PLCC case, memory ics is a single file. On the chip, there is an 2kB memory, which is the size of the chip's memory. A total of 52 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 5V will be necessary. A 52-pin package containing this memory device is used to house this device. The memory device in question has 52 pins, thus indicating that it has 52 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 5V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 110mA for this memory component. This chip features all the merits of a conventional chip, but it also features AUTOMATIC POWER-DOWN to improve system performance. 2 ports allow read/write access to one memory address in this chip. As for power supplies, this memory chip requires just 5V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 4.5V. An operating voltage of no more than 5.5V is required.

7132LA55J8 Features


Package / Case: PLCC
52 Pins
Operating Supply Voltage:5V
Additional Feature:AUTOMATIC POWER-DOWN
I/O Type: COMMON


7132LA55J8 Applications


There are a lot of Integrated Device Technology (IDT)
7132LA55J8 Memory applications.


  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders
  • embedded logic
  • eDRAM
  • graphics card

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News