7133LA25JI8 Overview

RAM, SDR, SRAM is its memory type. As you can see, it is embedded in PLCC case. There is an 4kB memory capacity on the chip. As you can see from the diagram, the chip is planted with 68 terminations. In total, 1 functions are supported by this part. The memory device designed for this application has been designed to be powered by an 5V power supply. It is encased in an 68-pin package that contains this ic memory chip. It has 68 pins indicating it has 68 memory locations. It is noted that the operating supply voltage of this memory is 5V. Chips such as this one are mounted using Surface Mount mounting, a straightforward method of mounting that is effective. Memory chip's nominal supply current is 300mA. An address can be read and/or written to one memory address using 2 ports on the chip. This memory chip requires a mere 5V of power. In addition to this device, there are COMMON-bit memory mapped I/O port addresses on this device. A minimum operating temperature of -40°C must be met by this device. As a general rule, memory ics is recommended that the product be operated at temperatures no higher than 85°Cc, otherwise, damage could be done to it. Generally, this component is considered a type of SRAMs. This memory ics requires a minimum voltage of 4.5V. In order for it to operate properly, its voltage should not exceed 5.5V.

7133LA25JI8 Features

Package / Case: PLCC
68 Pins
Operating Supply Voltage:5V
I/O Type: COMMON

7133LA25JI8 Applications

There are a lot of Integrated Device Technology (IDT)
7133LA25JI8 Memory applications.

• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card
• hard disk drive (HDD)