7133LA25PFGI8 Overview

In terms of its memory type, it can be classified as RAM, SDR, SRAM. The case comes in the Tape & Reel style. In the case of TQFP, it is embedded within the case. The memory size of the chip is 4kB Mb. A total of 100 terminations have been planted on the chip. As many as 1 functions are supported for comprehensive working. The memory device is designed to be supplied with an 5V volt power supply in order to operate properly. In this ic memory chip, there is an 100-pin package that encloses the device. The memory device has 100 pins, which means that it has 100 memory locations, which indicates it is an 100-bit device. The operating supply voltage of this memory chip is noted to be 5V. A memory address is accessed through 2 ports on this chip. The power supply needed for this memory chip is only 5V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. In order for this device to function properly, its operating temperature must not be less than -40°C. Temperatures over 85°C°C are not recommended. This memory ics is capable of operating with an input current of 0.3mA at max. In most cases, this memory ics is regarded as being a type of SRAMs. Ideally, this part should be supplied with a voltage of at least 4.5V. There shall be a voltage limit of 5.5V for its operation.

7133LA25PFGI8 Features

• Package / Case: TQFP

• 100 Pins

• Operating Supply Voltage:5V

• I/O Type: COMMON

7133LA25PFGI8 Applications

There are a lot of Integrated Device Technology (IDT)  7133LA25PFGI8 Memory applications.

• telecommunications

• Cache memory

• multimedia computers

• hard disk drive (HDD)

• nonvolatile BIOS memory

• cell phones

• data buffer

• main computer memory

• embedded logic

• servers