7133SA55J Overview

RAM, SDR, SRAM is the type of memory it has. The PLCC case contains it. The chip has an 4kB memory. The chip has 68 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 5V of power. The memory device is enclosed in a package with an 68-pin connector. There are 68 pins on this memory device, which indicates it has 68 memory locations in it. A voltage of 5V is noted as the operating supply voltage for this memory. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component is rated at 285mA. A memory address is accessed through 2 ports on this chip. When it comes to power supplies, this memory chip only requires 5V . I/O port addresses on this device are mapped to memory addresses of COMMON bits. This device must operate at a minimum temperature of 0°C. Temperatures no higher than 70°C degrees Celsius are recommended for operation. It is recommended that the minimum supply voltage for this part be no less than 4.5V. Ideally, this part should be supplied with a voltage of at least 5.5V.

7133SA55J Features

Package / Case: PLCC
68 Pins
Operating Supply Voltage:5V
I/O Type: COMMON

7133SA55J Applications

There are a lot of Integrated Device Technology (IDT)
7133SA55J Memory applications.

• cell phones
• eSRAM
• mainframes
• multimedia computers
• networking
• personal computers
• servers
• supercomputers
• telecommunications
• workstations,