71342LA25JI8

Name	Value
Type	Parameter
Factory Lead Time	7 Weeks
Mount	Surface Mount
Package / Case	PLCC
Number of Pins	52
Published	2009
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	52
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn85Pb15)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Subcategory	SRAMs
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	225
Number of Functions	1
Supply Voltage	5V
Pin Count	52
Operating Supply Voltage	5V
Power Supplies	5V
Temperature Grade	INDUSTRIAL
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Memory Size	4kB
Number of Ports	2
Nominal Supply Current	260mA
Memory Type	RAM, SDR, SRAM
Access Time	25 ns
Organization	4KX8
Output Characteristics	3-STATE
Address Bus Width	24b
Density	32 kb
Standby Current-Max	0.0015A
I/O Type	COMMON
Sync/Async	Asynchronous
Word Size	8b
Standby Voltage-Min	2V
Length	19mm
Height Seated (Max)	4.57mm
Width	19mm
Thickness	3.63mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Contains Lead

Name

Value

Type

Parameter

Factory Lead Time

7 Weeks

Mount

Surface Mount

Package / Case

PLCC

Number of Pins

Published

2009

JESD-609 Code

Pbfree Code

Part Status

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

ECCN Code

EAR99

Terminal Finish

Tin/Lead (Sn85Pb15)

Max Operating Temperature

85°C

Min Operating Temperature

-40°C

Subcategory

SRAMs

Technology

CMOS

Terminal Position

QUAD

Terminal Form

J BEND

Peak Reflow Temperature (Cel)

225

Number of Functions

Supply Voltage

Pin Count

Operating Supply Voltage

Power Supplies

Temperature Grade

INDUSTRIAL

Interface

Parallel

Max Supply Voltage

5.5V

Min Supply Voltage

4.5V

Memory Size

4kB

Number of Ports

Nominal Supply Current

260mA

Memory Type

RAM, SDR, SRAM

Access Time

25 ns

Organization

4KX8

Output Characteristics

3-STATE

Address Bus Width

24b

Density

32 kb

Standby Current-Max

0.0015A

I/O Type

COMMON

Sync/Async

Asynchronous

Word Size

Standby Voltage-Min

Length

19mm

Height Seated (Max)

4.57mm

Width

19mm

Thickness

3.63mm

Radiation Hardening

RoHS Status

RoHS Compliant

Lead Free

Contains Lead

71342LA25JI8 Overview

As far as its memory type goes, it falls into the RAM, SDR, SRAM category. PLCC case encloses it. There is 4kB of memory on the chip. There are 52 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 5V volt power supply in order to operate properly. In this ic memory chip, there is an 52-pin package that encloses the device. It is worth noting that this memory device has 52 pins, which indicates it has 52 memory locations. This memory chip has an operating supply voltage of 5V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 260mA. Using 2 ports, a single memory address can be read and/or written. As for the power supply, this memory chip only needs 5V . A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least -40°C. Temperatures over 85°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 4.5V volts. The operating voltage of the memory ics shall not exceed 5.5V.

71342LA25JI8 Features

Package / Case: PLCC
52 Pins
Operating Supply Voltage:5V
I/O Type: COMMON

71342LA25JI8 Applications

There are a lot of Integrated Device Technology (IDT)
71342LA25JI8 Memory applications.

multimedia computers
networking
personal computers
servers
supercomputers
telecommunications
workstations,
DVD disk buffer
data buffer
nonvolatile BIOS memory