5V V Surface Mount 52 Pin Memory IC 32 kb kb 19mm mm 280mA mA 8b b
SOT-23
71342SA25J Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
PLCC
Number of Pins
52
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
52
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
J BEND
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
5V
Pin Count
52
Operating Supply Voltage
5V
Power Supplies
5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Memory Size
4kB
Number of Ports
2
Nominal Supply Current
280mA
Memory Type
RAM, SDR, SRAM
Access Time
25 ns
Organization
4KX8
Output Characteristics
3-STATE
Address Bus Width
24b
Density
32 kb
Standby Current-Max
0.015A
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
8b
Length
19mm
Height Seated (Max)
4.57mm
Width
19mm
Thickness
3.63mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
71342SA25J Product Details
71342SA25J Overview
As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In the case of PLCC, it is embedded within the case. A memory chip with a capacity of 4kB is used on this device. On the chip, there are 52 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 5V. The memory device has an 52-pin package, which encloses it in a small package. I have noticed that the memory device has 52 pins, which indicates that it has 52 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 280mA. The memory chip has 2 ports for granting read/write access to one memory address. There is only a single power supply required for this memory chip. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below 0°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 70°C, otherwise damage to the part may occur as a result of overheating. In most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 4.5V volts. The operating voltage shall not exceed 5.5V.