7134LA35J8 Overview

A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. Embedded in the PLCC case, memory ics is a single file. On the chip, there is an 4kB memory, which is the size of the chip's memory. A total of 52 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 5V will be necessary. A 52-pin package containing this memory device is used to house this device. The memory device in question has 52 pins, thus indicating that it has 52 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 5V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 210mA for this memory component. This chip features all the merits of a conventional chip, but it also features AUTOMATIC POWER-DOWN; BATTERY BACKUP to improve system performance. 2 ports allow read/write access to one memory address in this chip. As for power supplies, this memory chip requires just 5V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Ideally, this part should be supplied with a voltage of at least 4.5V. An operating voltage of no more than 5.5V is required.

7134LA35J8 Features

Package / Case: PLCC
52 Pins
Operating Supply Voltage:5V
Additional Feature:AUTOMATIC POWER-DOWN; BATTERY BACKUP
I/O Type: COMMON

7134LA35J8 Applications

There are a lot of Integrated Device Technology (IDT)
7134LA35J8 Memory applications.

• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card