7134LA35P Overview

There is a memory type RAM, SDR, SRAM for this type of device. The case comes in the Bulk style. The file is embedded in a PDIP case. This chip has an 4kB size of memory on it, so a lot of data can be stored on it. The chip contains 48 terminations. As many as 1 functions are supported for comprehensive working. An 5V supply is required for this ic memory chip to operate properly. A package of 48 pins is used to protect this memory device. The memory device has 48 pins, which means that it has 48 memory locations, which indicates it is an 48-bit device. This memory runs on an 5V operating supply voltage. Memory chips configured with Through Hole mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 210mA. Although it has all the merits this chip has, it is also equipped with AUTOMATIC POWER-DOWN; BATTERY BACKUP to give a performance boost to the system. Each memory address is accessed by one of 2 ports on this chip. The power supply needed for this memory chip is only 5V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 4.5V. A maximum voltage of 5.5V shall be allowed for its operating voltage.

7134LA35P Features

Package / Case: PDIP
48 Pins
Operating Supply Voltage:5V
Additional Feature:AUTOMATIC POWER-DOWN; BATTERY BACKUP
I/O Type: COMMON

7134LA35P Applications

There are a lot of Integrated Device Technology (IDT)
7134LA35P Memory applications.

• personal computers
• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic