5V V Surface Mount 64 Pin Memory IC 8 kb kb 14mm mm 155mA mA 8b b
SOT-23
7140SA100PF Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
64
Published
2013
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
64
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
0.8mm
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
64
Operating Supply Voltage
5V
Power Supplies
5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Number of Ports
2
Nominal Supply Current
155mA
Memory Type
RAM, SRAM
Access Time
100 ns
Organization
1KX8
Output Characteristics
3-STATE
Address Bus Width
20b
Density
8 kb
Standby Current-Max
0.015A
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
8b
Length
14mm
Height Seated (Max)
1.6mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
7140SA100PF Product Details
7140SA100PF Overview
A RAM, SRAM-type memory can be classified as the memory type of this device. Embedded in the TQFP case, memory ics is a single file. A total of 64 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 5V will be necessary. A 64-pin package containing this memory device is used to house this device. The memory device in question has 64 pins, thus indicating that it has 64 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 5V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 155mA for this memory component. 2 ports allow read/write access to one memory address in this chip. As for power supplies, this memory chip requires just 5V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 4.5V. An operating voltage of no more than 5.5V is required.