Surface Mount 100 Pin Memory IC 18 Mb kb 20mm mm 215mA mA 36b b
SOT-23
71T75602S150PFG8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
8 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Published
2012
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3
Number of Terminations
100
Terminal Finish
Matte Tin (Sn) - annealed
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
PIPELINED ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
2.5V
Terminal Pitch
0.65mm
Frequency
150MHz
[email protected] Reflow Temperature-Max (s)
30
Pin Count
100
Operating Supply Voltage
2.5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
2.625V
Min Supply Voltage
2.375V
Memory Size
2.3MB
Number of Ports
1
Nominal Supply Current
215mA
Memory Type
RAM, SDR, SRAM
Frequency (Max)
150MHz
Access Time
3.8 ns
Output Characteristics
3-STATE
Address Bus Width
19b
Density
18 Mb
Standby Current-Max
0.04A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
36b
Standby Voltage-Min
2.38V
Length
20mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1,000
$17.84009
$17.84009
71T75602S150PFG8 Product Details
71T75602S150PFG8 Overview
A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. TQFP case encloses it. A memory chip with a capacity of 2.3MB is used on this device. On the chip, there are 100 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. A voltage of 2.5V is required for the operation of this memory device. In this ic memory chip, there is an 100-pin package that encloses the device. This memory device has 100 pins, indicating it has 100 memory locations. It is noted that the operating supply voltage of this memory is 2.5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. As far as the nominal supply current of this memory component is concerned, it is rated at 215mA. The memory chip also offers PIPELINED ARCHITECTURE to level up system performance despite its merits. Using 1 ports, a single memory address can be read and/or written. In addition to this device, there are COMMON-bit memory mapped I/O port addresses on this device. This device must operate at a minimum temperature of 0°C. As a general rule, memory ics is recommended that the product be operated at temperatures no higher than 70°Cc, otherwise, damage could be done to it. SRAMs-types are usually considered to be this component. It is recommended that the minimum supply voltage for this part be no less than 2.375V. The operating voltage of the memory ics shall not exceed 2.625V. As a result of the frequency of this memory chip, data can be processed at a rate of 150MHz. A memory chip of this type can operate at a maximum frequency of 150MHz.
71T75602S150PFG8 Features
Package / Case: TQFP 100 Pins Operating Supply Voltage:2.5V Additional Feature:PIPELINED ARCHITECTURE I/O Type: COMMON Freguency at 150MHz 150MHz terminals
71T75602S150PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 71T75602S150PFG8 Memory applications.