Surface Mount 100 Pin Memory IC 18 Mb kb 20mm mm 215mA mA 18b b
SOT-23
71T75802S133PFGI8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
8 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Packaging
Tape & Reel
Published
2012
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
100
Terminal Finish
Matte Tin (Sn) - annealed
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Additional Feature
PIPELINED ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
2.5V
Terminal Pitch
0.65mm
Frequency
133MHz
Pin Count
100
Operating Supply Voltage
2.5V
Temperature Grade
INDUSTRIAL
Interface
Parallel
Max Supply Voltage
2.625V
Min Supply Voltage
2.375V
Number of Ports
1
Nominal Supply Current
215mA
Memory Type
RAM, SRAM
Access Time
4.2 ns
Output Characteristics
3-STATE
Address Bus Width
20b
Density
18 Mb
Standby Current-Max
0.06A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
18b
Standby Voltage-Min
2.38V
Length
20mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1,000
$24.55819
$24.55819
71T75802S133PFGI8 Product Details
71T75802S133PFGI8 Overview
A RAM, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel case as well. Embedded in the TQFP case, memory ics is a single file. A total of 100 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 2.5V will be necessary. A 100-pin package containing this memory device is used to house this device. The memory device in question has 100 pins, thus indicating that it has 100 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 2.5V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 215mA for this memory component. This chip features all the merits of a conventional chip, but it also features PIPELINED ARCHITECTURE to improve system performance. 1 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 2.375V. An operating voltage of no more than 2.625V is required. A frequency of 133MHz is used to process the data on this memory chip.
71T75802S133PFGI8 Features
Package / Case: TQFP 100 Pins Operating Supply Voltage:2.5V Additional Feature:PIPELINED ARCHITECTURE I/O Type: COMMON Freguency at 133MHz 133MHz terminals
71T75802S133PFGI8 Applications
There are a lot of Integrated Device Technology (IDT) 71T75802S133PFGI8 Memory applications.