71V016SA10PHGI8 Overview

As far as memory types are concerned, RAM, SDR, SRAM - Asynchronous is considered to be its memory type. In addition, memory ics is available in a Tape & Reel case as well. In the case of TSOP, it is embedded within the case. A memory chip with a capacity of 128kB is used on this device. On the chip, there are 44 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 3.3V. The memory device has an 44-pin package, which encloses it in a small package. I have noticed that the memory device has 44 pins, which indicates that it has 44 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 3.3V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. The memory chip has 1 ports for granting read/write access to one memory address. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below -40°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 85°C, otherwise damage to the part may occur as a result of overheating. In most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 3.15V volts. The operating voltage shall not exceed 3.6V.

71V016SA10PHGI8 Features

Package / Case: TSOP
44 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON

71V016SA10PHGI8 Applications

There are a lot of Integrated Device Technology (IDT)
71V016SA10PHGI8 Memory applications.

• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM