Surface Mount 32 Pin Memory IC 1 Mb kb 20.95mm mm 120mA mA 8b b
SOT-23
71V124SA15PHGI8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
TSOP
Number of Pins
32
Published
2013
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
32
Terminal Finish
Matte Tin (Sn) - annealed
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Subcategory
SRAMs
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Time@Peak Reflow Temperature-Max (s)
30
Pin Count
32
Operating Supply Voltage
3.3V
Temperature Grade
INDUSTRIAL
Interface
Parallel
Max Supply Voltage
3.6V
Min Supply Voltage
3V
Memory Size
128kB
Number of Ports
1
Nominal Supply Current
120mA
Memory Type
RAM, SDR, SRAM - Asynchronous
Access Time
15 ns
Output Characteristics
3-STATE
Address Bus Width
17b
Density
1 Mb
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
8b
Standby Voltage-Min
3V
Length
20.95mm
Width
10.16mm
Thickness
1mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1,500
$1.64493
$1.64493
71V124SA15PHGI8 Product Details
71V124SA15PHGI8 Overview
In this case, the memory type of the device can be classified as RAM, SDR, SRAM - Asynchronous. An embedded TSOP case surrounds memory ics. It is estimated that the memory size on the chip is 128kB. It is planted on the chip with 32 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 3.3V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 32 pins that allows it to be connected to a computer. The memory device has a total of 32 pins, thus indicating that it has a total of 32 memory locations. It is noted that the operating supply voltage of this memory is 3.3V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 120mA for its nominal supply current when it comes to the memory component. Several ports on this chip are used to access one memory address for reading and writing. I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than -40°C. The temperature should not exceed 85°C degrees Celsius. SRAMs components are usually considered types of this component. This memory ics should not be operated with a voltage below 3V volts at the minimum. There shall be a voltage limit of 3.6V for its operation.